Cisco WS-C2960L-48TS-LL 48-Port Gigabit B2B Network Switch

The Cisco WS-C2960L-48TS-LL is a managed Catalyst 2960-L switch built for reliable Layer 2 access. It provides 48 10/100/1000 Ethernet ports, 4 fixed 1G SFP uplinks, LAN Lite software, fanless operation, compact 1U rack design, and secure management for SMB, branch, and enterprise networks at scale.

Partagez votre amour
Attribute Specification
Configurations – 10/100/1000 Ethernet Ports 48
Configurations – Uplink Interfaces 4 SFP
Configurations – Available PoE Power
Configurations – Fanless Y
Configurations – Dimensions (H x D x W) 1.73 x 9.45 x 17.5 in. (4.4 x 24 x 44.5 cm)
Configurations – Net Weight 7.21 lb (3.27 kg)
Console Ports – RJ45 Ethernet 1
Console Ports – USB mini-B 1
Console Ports – USB-A port for storage and Bluetooth console 1
Memory and Processor – CPU ARMv7 800 MHz
Memory and Processor – DRAM 512 MB
Memory and Processor – Flash memory 256 MB
Performance – Forwarding bandwidth 52 Gbps
Performance – Switching bandwidth 104 Gbps
Performance – Forwarding rate (64-byte L3 packets) 77.38 Mpps
Performance – Unicast MAC addresses 8K
Performance – Maximum active VLANs 64
Performance – VLAN IDs available 4094
Performance – Maximum STP instances 64
Performance – Maximum SPAN sessions 1
Performance – MTU-L3 packet 9198 bytes
Performance – Jumbo Ethernet frame 10,240 bytes
Performance – MTBF in hours (Data) 1,370,769
Performance – MTBF in hours (PoE) 437,970
Environment – Operating temperature – Up to 5,000 ft 23ºF to 113ºF (–5ºC to 45ºC)
Environment – Operating temperature – Up to 10,000 ft 23ºF to 104ºF (–5ºC to 40ºC)
Environment – Operating altitude 10,000 ft (3000m)
Environment – Operating relative humidity 5% to 90% at 40ºC
Environment – Storage temperature –13º to 158ºF (–25º to 70ºC)
Environment – Storage altitude 15,000 ft (4500m)
Environment – Storage relative humidity 5% to 95% at 65ºC
Environment – Storage altitude Minimum ambient temperature for cold start is 0°C (32°F)
Electrical – Data – Voltage (autoranging) 110 to 220V AC in
Electrical – Data – Frequency 50 to 60 Hz
Electrical – Data – Current 0.29A to 0.48A
Electrical – Data – Power rating (maximum consumption) 0.09 kVA
Electrical – Data – Power consumption (watts) – 0% traffic 29.7
Electrical – Data – Power consumption (watts) – 10% traffic 41.1
Electrical – Data – Power consumption (watts) – 100% traffic 41.1
Electrical – Data – Power consumption (watts) – Weighted average 37.3
Safety and Compliance – Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1
Safety and Compliance – EMC: emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A
Safety and Compliance – EMC: immunity EN55024, CISPR24, EN300386, KN24
Safety and Compliance – Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
Safety and Compliance – Telco Common Language Equipment Identifier (CLEI) code
Safety and Compliance – U.S. government certifications USGv6 and IPv6 Ready Logo
Connectors and Interfaces – Ethernet interfaces – 10BASE-T ports RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
Connectors and Interfaces – Ethernet interfaces – 100BASE-TX ports RJ-45 connectors, 2-pair Category 5 UTP cabling
Connectors and Interfaces – Ethernet interfaces – 1000BASE-T ports RJ-45 connectors, 4-pair Category 5 UTP cabling
Connectors and Interfaces – Ethernet interfaces – 1000BASE-T SFP-based ports RJ-45 connectors, 4-pair Category 5 UTP cabling
Connectors and Interfaces – Indicator LEDs – Per-port status link integrity, disabled, activity, speed, and full duplex
Connectors and Interfaces – Indicator LEDs – System status system, PoE, and link speed
Connectors and Interfaces – Console cables CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
Connectors and Interfaces – Console cables CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors
Connectors and Interfaces – Power Use the supplied AC power cord to connect the AC power connector to an AC power outlet

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “Cisco WS-C2960L-48TS-LL 48-Port Gigabit B2B Network Switch”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *